Mobile Nav Open Mobile Nav Close

Roll over image to zoom in

Truss Type Wall Reinforcement (1200)

Part Number: 1200

Diagonal cross wires spaced 16" o.c.

Features and Benefits

Diagonal cross wires spaced 16" o.c.


Type 304 Stainless Steel
Hot-Dip Galvanized after fabrication
Mill Galvanized

#1200 Truss Type Wire Reinforcement

Truss Wire is typically used when differential movement is not a concern, as in single wythe concrete masonry walls.

Use Ladder Type reinforcement for reinforced or grouted walls.

Wire deformations 8 sets per inch in compliance with ASTM A951.

Wire SizeSide RodsCross Rods 
in Lineal Feet

Material Specifications 

ASTM A951/A951M (Standard Specification for Steel Wire for Masonry Joint Reinforcement)

Stainless Steel: Wire: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2)

Mill Galvanized: Wire: ASTM A 641 (0.1 oz/ ft2.)

Plain Carbon Steel: Wire: ASTM A1064/A1064M, ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi

Help from the Experts